M16 2-4 Pin Circular Industrial Male Connector

Technical Specifications

M16 Field-Wireable Plug | B2B OEM/Wholesale Supply

Product Overview

The Kepala Konektor Industri Pria Melingkar M16 2-4 Pin is a circular industrial connector in the M16 thread size, offered with 2, 3, or 4 contact positions in a male plug form factor designed for field assembly onto a cable. As an industrial connector manufacturer, we produce this M16 connector for industrial automation, sensor wiring, and signal/power interconnection where a compact circular connector is required. For M16 connector supplier buyers—including sensor manufacturers, industrial equipment builders, automation system integrators, and replacement-parts distributors—this product is a connector component, not a complete cable assembly or a sensor itself.

M16 Thread & Coupling

The Kepala Konektor Industri Pria Melingkar M16 2-4 Pin uses an M16×1.5 metric thread coupling ring, a widely used circular connector form factor in industrial sensor and actuator applications. The male plug screws onto a matching M16 female receptacle or cable connector, with the coupling ring providing a secure, vibration-resistant connection. As an M16 circular connector supplier, we produce the plug to the M16 thread dimensions so that it mates with standard M16 female connectors and panel receptacles from compatible manufacturers. For M16 sensor connector buyers, the M16 form factor is a common choice where space is limited but a circular, screw-locked connection is preferred over simple terminal blocks.

2 / 3 / 4 Pin Configurations

The Kepala Konektor Industri Pria Melingkar M16 2-4 Pin is offered in three common contact configurations: 2-pin for single-signal or two-wire power applications, 3-pin for common sensor and actuator wiring (supply, signal, ground), and 4-pin for additional signal or power circuits. As an M16 2 pin connector manufacturer, we recommend that buyers select the pin count based on the actual number of circuits required by the sensor, actuator, or device being connected—over-specifying pins increases cost and panel space, while under-specifying leaves no spare contacts. For M16 3 pin connector and M16 4 pin connector buyers, the pin layout follows the common industrial M16 contact arrangement, but we recommend confirming pin assignments with the device manufacturer before volume ordering.

Construction & Environmental Rating

The Kepala Konektor Industri Pria Melingkar M16 2-4 Pin is built with a metallic coupling ring and a durable housing, with a cable gland at the rear that clamps onto the cable jacket. When mated with a matching female connector and properly tightened, the assembly reaches an IP67-rated sealing against dust and temporary water immersion (rated when mated and correctly installed). As an M16 male connector manufacturer, we note that the IP rating applies only when the connector is mated and the cable gland is correctly fitted; an unmated connector or an incorrectly sized cable gland will not achieve the rated sealing. For M16 cable connector buyers, we recommend selecting the correct cable diameter range for the included gland and confirming the IP rating against the actual installed condition.

Termination & Field Assembly

The Kepala Konektor Industri Pria Melingkar M16 2-4 Pin is designed for field assembly onto a customer-supplied cable, with solder contacts or screw-terminal contacts depending on the variant. The connector can be assembled on site without specialized tooling (basic screwdriver for screw-terminal versions, soldering iron for solder versions), making it suitable for on-site maintenance and custom cable builds. As an M16 plug manufacturer, we recommend that installers follow the contact pinout, torque the coupling ring to the specified feel, and verify continuity before energizing the circuit. For M16 field-wireable connector buyers, this field-assembly design is the key advantage over pre-molded cable connectors: it allows on-site cable length customization.

Applications

The Kepala Konektor Industri Pria Melingkar M16 2-4 Pin is used across a range of industrial automation scenarios: connecting proximity sensors, photoelectric sensors, limit switches, small actuators, and field I/O modules; signal and low-power interconnect on machinery and control cabinets; and replacement of damaged connectors on existing sensor cables. As an M16 sensor plug supplier, we serve sensor manufacturers, machine builders, system integrators, and maintenance depots. For industrial M16 connector buyers, this product is a standard BOM item on sensor and actuator circuits where M16 is the chosen interface.

OEM / Customization & Wholesale

We offer M16 connector OEM and private-label services for sensor brands, machine builders, and automation distributors that want a co-branded or configuration-specific connector. The Kepala Konektor Industri Pria Melingkar M16 2-4 Pin supports customization of pin count (2/3/4), termination style (solder or screw), cable gland diameter range, housing material, and bulk or retail packaging. As an M16 connector supplier manufacturer, we support order quantities from sample pieces for engineering validation to bulk production runs for sensor OEMs. We provide sample units for buyers to test cable fit, pinout, and coupling feel before volume commitment.

Why Partner With Us

When you source the Kepala Konektor Industri Pria Melingkar M16 2-4 Pin through our production facility, you work with an industrial connector manufacturer that controls housing machining, contact insertion, and end-of-line continuity testing in-house. Our engineering team supports pinout questions, cable gland sizing, and after-sales technical response. We serve sensor manufacturers, machine builders, system integrators, and regional distributors, adapting pin configurations and termination styles to regional industrial automation requirements.

Technical Specifications

Frequently Asked Questions

Q: Is this a complete cable with connector on both ends? No. The Kepala Konektor Industri Pria Melingkar M16 2-4 Pin is a single male connector head designed for field assembly onto a customer-supplied cable. It does not include a pre-terminated cable, a mating female connector, or a sensor. If you need a complete cable assembly with connectors on both ends, please specify the required length and mating connector type when ordering.

Q: Does it include both male and female? No. The Kepala Konektor Industri Pria Melingkar M16 2-4 Pin is the male plug only. The matching female connector (either cable-side or panel receptacle) is sold separately. Please specify whether you need male, female, or both when ordering.

Q: What IP rating does it achieve? The Kepala Konektor Industri Pria Melingkar M16 2-4 Pin is rated IP67 when mated with a matching female connector and the cable gland is correctly fitted to the cable diameter. Unmated or improperly installed connectors will not achieve the rated sealing. We recommend confirming the cable diameter range of the gland before ordering.

Q: Can I assemble it in the field? Yes. The Kepala Konektor Industri Pria Melingkar M16 2-4 Pin is designed for field assembly. Screw-terminal versions can be terminated with a standard screwdriver; solder versions require a soldering iron. We recommend following the included pinout diagram and verifying continuity before energizing.

Dapatkan Penawaran

Ready to source the Kepala Konektor Industri Pria Melingkar M16 2-4 Pin for your sensor wiring, machine build, or maintenance inventory? Contact our circular industrial connector sales team today for current pricing, sample lead times, pin configuration options, and MOQ details. Whether you need a few sample pieces for engineering validation or bulk supply for sensor OEM production, our team is prepared to support your project with M16 connector components and responsive communication.